Offer granted Installer PE «*********» in response to a proposal for building equipment ******** Consulates at ************ wired local area network (LAN), telephone networks, electricity networks.
«***********» PE is a Certified Installer
- ******
- - net (ZAO «*******») certificate ***** Certified
- Installer
№ 0128 of 29/10/2008 . - Podtverzhdenie of browser-site manufacturer SCS
- ****** -
net : - ******************* ** employees of the company-installer PE «********» have been trained on the course "Installing SCS ****** - net
- » and have registered certificates.
- Structured Cabling System
-
- Structured Cabling System is a single cable network building for flexible construction of a local area network (information) and connect the handsets to the telephone station. Cable infrastructure constructed on the basis of one of the main communications center.
- - the number of switched socket-144 units, of which 96 - LAN ports, 48 - phone sockets.
- structured cabling system is installed on three floors:
- - The subsystem
Subsystem workplace provides the connection of various network equipment using the patch cord (patch cords) to any subscriber outlet Desktop places, such as computer, network printer, switch, etc. Subscriber has a LAN socket interface RJ-45 Category 6 (ekran.) and set a dual caliper. Telephone socket has a slot RJ -12 and installed in the single-port support.
- horizontal subsystem
Horizontal subsystem is laid between the telecommunications closet and cable subscriber socket, shielded twisted pair category 6 LAN cable and 3 categories for telephony. Laying horizontal cable as the cable channels (plastic boxes).
LAN
One workstation is equipped with two RJ-45 Category 6 (ekran.) which are installed in a dual caliper. Rasklyuchenny in the socket cable (Category 6, the screen.) on cable channels going into the room server and rasklyuchaetsya a patch panel, category 6 (ekran.)
Use interconnection network based on shielded twisted pair, modules, and Patch Panels Category 6 allows you to use the LAN to the most modern protocols and application period of obsolescence of such a LAN is more than 10 years.
-
telephone wiring on jobs
One workstation is equipped with one RJ-12 jack and placed in a single-port support. Rasklyuchenny in the socket cable (category 3) on cable channels going the premises server and rasklyuchaetsya a plinth.
- Electrical wiring (power socket 220 to the ground)
- Materials
structured cabling project will be carried out in accordance with standards
ANSI/TIA/EIA-568-B
,
- ISO
/
IEC
CENELEC EN 50173 - 1 Certificates of compliance for materials ***** - net can view на веб-странице по адресу: *************** Копия Сертификата соответствия Государственного комитета Украины по вопросам технического регулирования and consumer policy UkrSEPRO attached in additional materials to the commercial proposal.
Installer Private Company «******» offered to assemble Consulate building at the address ******** with distribution of local net (Local Area Network), telephone network and electricity network
- in answer to suggestion of Consulate of*********
- .
-
- Private Company «********» is a certified installer of *******-net (Closed Joint-Stock Company *******) according to Certificate of ********-NET Certified Installer № 0128 from
- 10/29/2008.
-
- ****************
-
-
- Structured Cabled System
-
-
-
SCS is installed on three floors of the building:
-
informational subsystem. -
-
Subsystem of work place provides with accessing of various network equipment with help of plug-wire (patch cord) in any telecommunications outlet of work place, for example, of computer, network printer, switchboard etc. Telecommunications outlets of Local Area Network have jack of RJ-45 category
- 1.1 Local network
-
- Use of local network distribution based on shielded twisted pair, modules and patch-panels of category 6 allows to apply Local Area Network for the most modern protocols and applications. Obsolescence period for such Local Area Network equals more than 10 years.
1. 2. Phone distribution to work places
-
-
2. Electric distribution (220 V socket with grounding
- )
-
-
One work place is supplied with a set from 6 sockets (220V). Socket set is located longitudinally. Foolproofing elements (16A) are near socket set. Socket set is powered with copper cable from intermediate distribution frame of the floor. Automatic protection device for 25A is installed in intermediate distribution frame of the floor. The intermediate distribution frame of the floor is powered from intermediate distribution frame of the building. The intermediate distribution frame of the building is powered with main electricity input of the building (basement).
Project of the SCS is to be made according to standards
ANSI/TIA/EIA-568-B, ISO/IEC 11801, CENELEC EN 50173-1.
-
Certificates and certification compliance for ******-net materials can be found at the website with address:
Copy of certificate of conformity from Ukrainian State Committee on issues of technical control and consumer policy UkrSEPRO is attached to additional materials that come with the commercial offer.
0 comments:
Post a Comment